Bosch Greentherm C 950 ES NG 9.5 GPM 175000 BTU Condensing Natural Gas
Condensing tankless water heater is a top performance, fully condensing gas tankless water heater from Bosch. This 175,000 BTU heater is designed for residential applications and can deliver hot water up to 140 degrees F with a 10.5 GPM flow rate.
This Energy Star approved tankless water heater qualifies for the 2013 Federal Tax Credit and can produce enough hot water for 2 major applications in most homes.
Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- well ahead of the 2012 Low NOX emissions standards set by SCAQMD (California -- South Coast Air Quality Management District).
This heater features an electronic ignition system and can vent through either 3 inch or 4 inch diameter PVC vent pipe either through the side wall or up through the roof. Two concentric venting options are available including a polypropylene concentric up-and-out side-wall venting option for single units. Two to four units can now be exhausted through a single 6" polypropylene vent pipe.
The Bosch Greentherm model C 950 ES has an Energy Factor up to 0.93 and is equipped with an automated and fully modulating bypass for unsurpassed DHW temperature stability.
- Improved energy factor by 2 points, up to 0.93
- Benchmark temperature stability achieved with an active bypass
- Inlet water filter featuring easy external access
- New venting options
- Concentric up-and-out venting for single boilers and two to four unit single pipe cascades
- Introducing the water heater mobile app for sizing and technical documentation downloads
|Greentherm C 950 ES Commercial||Specifications|
|Application||Residential or Commercial|
|Max Input (BTU)||175,000|
|Min Input (BTU)||19,900|
|Capacity at 35?F Rise (gpm)||9.2|
|Capacity at 55?F Rise (gpm)||5.9|
|Min Flow Rate||0.5 GPM|
|Temp Range (?F)||100-140|
|Temp Stability (?F)||+/- 2|
|Default Temp (?F)||120|
|Installation Options||Indoor or Outdoor|
|Dimensions (w x h x d)||17.875" x 30" x 11"|
|Inlet Connection||3/4" NPT|
|Outlet Connection||3/4" NPT|
|Gas Connection||3/4" NPT|
|Max Water Pressure||150 psi|
|Min Water Pressure||30 psi|
|Min NG Presure||3.5" WC|
|Condensing Heat Exchanger||Aluminum|
|Venting Options||PVC, CPVC, ABS, Cat III Stainless Steel
Outdoor Kit and Polypropylene
|Vent Maximun Run||63'|
|Energy Star Rated||Yes|
|For models C 1210 ES/ESC : 35?F capacity is based on installation with a mixing valve to overcome typical pressure loss through the water heater and system.||-|
|* 3 Years if used in direct recirculation applications||See full details in "Warranty" section|